Techstick Car HUD P9 Smart GPS Heads up display with OBD2, Two Display Way, Over Speed Warning Alarm, Water Temperature, Voltage, Compatible with OBD II EOBD System Model Cars

Key functions:

Long push right: Push right the wave button 5 seconds, then all LED will light, it means clear the engine fault code.

Long push left: Push left the wave button 5 seconds to turn off the buzzer, do it again to turn on the buzzer.

Long press in: Press in the setting button for 5 seconds to enter into menu setting mode, after finish adjustment, vertical long press in 5 seconds to save it and exit.

Short press in: Switch for fuel consumption, voltage, water temperature, single driving time(Minutes), single driving distance(KM,Mile), Engine RPM. (Please note: After enter into the setting menu, vertical short press in is to increase the menu.)

Short push left: Switch into the simple mode, only display the speed and RPM. (Please note: after enter into the setting menu, short push left is to increase the default value.)

Short push right: After enter into the setting menu, short push left is to decrease the default value.

Simple display mode:
Firstly push left the button is to display speed and RPM, secondly push left is only display speed.

Buzzer Icon:
Long push left the button: Push left the wave button for 5 seconds to turn off the buzzer, another 5 seconds to turn on the buzzer.

Clearing engine fault codes:
Long push right the wave button 5 seconds, then all LED will light, it means finish clear the engine fault code, do it again to back to normal display mode.

Reset setting:
When the product is on working, long press in for 5s to enter into the setting menu, short press in for 12 times to find menu 12 adjust the default value from 0 to 1, then press in for 5s to keep and exit.Technical Parameters:
Environment temperature: -40c- + 80c atmospheric pressure 86-106KPa
Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
Product size: 11.8*4.5*4.3(cm)
Product Weight: 110 g

Product Features

  • Special HUD for dedicated varieties of cars. This HUD is not universal for all the cars, please refer to us in advance before you purchase it.
  • Available for cars with OBD2 and EU OBD port (Car automatic diagnosis system), plug and play.
  • Multi-color design makes the screen more abundant and easier to read. Come with two display way, you can read from windshield or directly from the unit.
  • Rich Contents: speed, RPM, water temperature, voltage, instantaneous fuel consumption, average fuel consumption, driving distance measurement, shift reminders, fatigue driving reminders, low voltage alarm, high water temperature alarm, over speed alarm etc.
  • Auto power on/off: It start and off with vehicle started and shutdown, effective protection of the car battery; retaining the manual switch mode, more easy to control.

Click Here For More Information

Related Post

Tagged , , , , , , , , , , , , , , , , . Bookmark the permalink.

2 Responses to Techstick Car HUD P9 Smart GPS Heads up display with OBD2, Two Display Way, Over Speed Warning Alarm, Water Temperature, Voltage, Compatible with OBD II EOBD System Model Cars

  1. Steven says:

    A little patience and tech savvy is recommended for a satisfactory experience.

  2. Josh F. says:

    Great addition to my vehicle! Well, it is definitely plug and play, provided you have an OBDII connector that is. Most connectors are exposed outlets under the steering wheel dash area. The plug only fits one way and then the cable can be routed up to the dash and plugged into the display box. The connector there is a standard USB type. After plugging this in and turning on the ignition my display powered on immediately. There is a power switch but the display can also be set to auto-on. The other two switches are…

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.